8 inch ZONSEN E-Start 1000cc 35hp Gas Powered 4 - Wheel Drum Wood Chipper with Taillight , B200

8 inch ZONSEN E-Start 1000cc 35hp Gas Powered 4 - Wheel Drum Wood Chipper with Taillight , B200

 
$1,199.00
$1,199.00
SAVE Sold out
8 inch ZONSEN E-Start 1000cc 35hp Gas Powered 4 - Wheel Drum Wood Chipper with Taillight , B200

8 inch ZONSEN E-Start 1000cc 35hp Gas Powered 4 - Wheel Drum Wood Chipper with Taillight , B200

$1,199.00
$1,199.00
SAVE Sold out

Product Overview

  • MechMaxx 35HP gasoline engine wood chipper, electric start, rated power up to 23.5kw/3600rpm.
  • This wood chipper has extremely powerful roller with the diameter of 14in., which can shred branches up to 8 inches.
  • Double-edge cut reversible blades greatly increase the service life.
  • Both the feeding chute and the discharge chute can be opened quickly and easily for the maintenance and repair.
  • By adopting whole shaped technology, the discharge chute is both attractive and practical with the ability to rotate 360 degrees.
  • You can stop the engine quickly in a crisis to improve operator safety with a safety button above the feeding chute and the emergency stop press bar on lower side of the feeding chute.
  • With front 13x5.00-6; rear 19x7.00-8 Tubeless tires and 48in. super-wide wheelbase, this wood chipper has the ability of driving on steep ground with the high stability.
  • This is a high-performance wood chipper fit for professionals and leasing companies.
  • Gasoline/Petrol: Clean, fresh, unleaded gasoline
  • Oil: 10W-30

    Product Features

    Electric Start and Battery
    The B200 Wood Chipper is powered by a 35hp 1000cc electric start gasoline engine, and equipped with a 45Ah 12V Lead-acid battery.
    Feeding Chute
    There are 2 buckles that can be quickly opened for easy cleaning of residual wood chips and blade replacement on one side of the feeding chute. When the feeding chute is open, the gasoline engine will trigger a limit switch and shut down to ensure safety during maintenance.
    Discharge Chute
    Similarly, on one side of the discharge chute, there are 2 buckles that can be quickly opened for easy cleaning of residual wood chips and blade replacement. When the discharge chute is open, the gasoline engine will trigger a limit switch and shut down to ensure safety during maintenance.
    Safety Devices
    On the upper side of the feeding chute, there is an emergency stop button, and on the lower side, there is an emergency stop press bar. These can be used to stop the machine at any time in case of an emergency.
    Maximum Wood Chip Diameter 8’’
    The core cutting component of the B200 Wood Chipper is a roller with a diameter of 14” and a length of 12”. Such a large roller generates impressive inertia, providing maximum cutting force to effortlessly cut branches with a maximum diameter of 8” .
    19*7.00-8 tubeless tire
    The B200 is equipped with two DOT-approved tubeless tires sized 19*7.00-8, and the wheelbase reaches an impressive 48” , providing enhanced stability when being towed.
    Tail Light and Plug
    The B200 is equipped with tail light, and on one side of the trailer, there is an American seven-pin plug. The plug can be connected to the towing vehicle when being towed, allowing the tail light of B200 to synchronize with the vehicle's braking and turning signals.
    Foldable and Lockable Front Wheels
    When the B200 is being towed, the two 13*5.00-6 tubeless tires need to be folded up. When the B200 is operational, they can be lowered. When the B200 needs to be pushed to a designated work area, the two wheels can be locked to ensure straight-line movement.
    Discharge Chute Design
    The entire discharge chute is stamped and welded together from two molds, providing an aesthetically pleasing design. The discharge chute can be fully opened, allowing for a clearer view of the blade box interior for maintenance and blade replacement. The top of the discharge chute can rotate 360 degrees.

View full details